Products
Showing all 13 results
-
PTFE
Bellows
Specifications:
- Size – 25NB (1″) TO 600 NB (24″)
- Material – PTFE
Technical Specification PTFE Membrane: Paste extruded
PTFE Liner as ASTM D 4895Flange Drilling: as per ASME
B16.5 /DIN/JIS with one side off
Center & other side on centerReinforcement rings: SS304 / SS316 Paint: 2 coats of red oxide / hot
Dip galvanized / powder coated /
Specified by customerFlange Material IS2062 / A516 /
SS316 / A216 WCB, PP / PVCNote: Other than above length mentioned we do manufacture standard length bellows like as 100, 150, 200, 300 & 500* All size products in single piece construction.
* All Dimensions are in millimeterSKU: n/a -
PTFE
FEP/PFA LINED BALL VALVE
DESCRIPTION MATERIAL OF CONSTRUCTION Body Ductile Cast Iron ASTM-A-395 or A-216-WCB or SS Ball/Stem Lining FEP : D-2116 Type – III, PFA : D-3307 Type II Seat Ring Virgin PTFE, D-1457 Gland Packing Virgin PTFE, D-1457 Gland Pusher MS/SS/ASTM-A-216-WCB Fasteners SS-304 Hand Lever MS/SS Note: End flanges are drilled to individual specification like BS, ASA, DIN, or JIS.
* All size products in single piece construction.
* All Dimensions are in millimetre.SKU: n/a -
PTFE
Lined Basket Type Strainer
Specifications:
- Size – 25NB (1″) TO 600 NB (24″)
- Material – PTFE / PFA
- Type – Bucket Type & ‘Y’ Type
DESCRIPTION MATERIAL OF CONSTRUCTION Cover FEP/PFA Lined MS/SS Plate Bolt Nut MS/SS Lining FEP/PFA Body Flange As Per ANSI B 16.5 (150#) Nozzle Flange As Per ANSI B 16.5 (150#) Nozzle Pipe As Per ANSI 36.10 sch-40/80 Body Pipe As Per ANSI 36.10 sch-40/80 Element FEP/PFA lined MS/SS Plate Bottom Plate FEP/PFA Gasket PTFE Blind Flange MS/SS SKU: n/a -
PTFE
Lined Expansion Bellows
Specifications:
- Size – 25NB (1″) TO 600 NB (24″)
- Material – PTFE
Technical Specification PTFE Membrane: Paste extruded
PTFE Liner as ASTM D 4895Flange Drilling: as per ASME
B16.5 /DIN/JIS with one side off
Center & other side on centerReinforcement rings: SS304 / SS316 Paint: 2 coats of red oxide / hot
Dip galvanized / powder coated /
Specified by customerFlange Material IS2062 / A516 /
SS316 / A216 WCB, PP / PVCNote: Other than above length mentioned we do manufacture standard length bellows like as 100, 150, 200, 300 & 500* All size products in single piece construction.
* All Dimensions are in millimeterSKU: n/a -
PTFE
Lined Flowmeter Body
Specifications:
- Size – 15NB (1/2″) TO 600 NB (24″)
- Material – PTFE / PFA / Neoprene
- Standard – Sch Based / OD Bases
DESCRIPTION MATERIAL OF CONSTRUCTION LINING PTFE / NEOPRENE BODY MATERIAL CS, MS, SS304, SS316, SS316L BODY PIPE SCH-40, SCH-80, AS PER INDIVIDUAL CUSTOMER REQUIREMENT FLANGE MATERIAL CS, MS, SS304, SS316, SS316L FLANGE STANDARD ASA 150#, DIN, AS PER INDIVIDUAL CUSTOMER REQUIREMENT SKU: n/a -
PTFE
Lined Sight Glass Body
Specifications:
- Size – 25NB (1″) TO 600 NB (24″)
- Liner MOC – PTFE/PFA/FEP
- Body MOC – CS, M.S, SS316, SS316L, SS304, SS304L
- Type – Double Window & Full View
* As per Requirement
1) Dimensional Standards:
All dimensions are in mm otherwise specified & as per ANSI B16.92) Material of Construction:
A) Tee & Sight Glass are supplied either FEP or PFA lined depending on process liquid handled & as per standard resin spec. ASTM D 2116 & ASTM D 3307 Type II respectively.
B) Tee & Sight Glass are being supplied with fixed flanges. However it can be supplied with loos Flanges as per individual customer’s requirement & confirms to ASTM A-105 or IS-2062.* All size products in single piece construction.
* All Dimensions are in millimeterSKU: n/a -
PTFE
Lined Y Type Strainer
Specifications:
- Size – 25NB (1″) TO 600 NB (24″)
- Material – PTFE / PFA
- Type – Bucket Type & ‘Y’ Type
1) Dimensional Standards:
All dimensions are in mm otherwise specified & as per ANSI B16.9.
2) Material of Construction:
A) Strainers are supplied either in FEP OR PFA lined depending on process liquid handled & as per standard resin specification. ASTM D 2116 & ASTM D 3307 Type II respectively.
B) Seamless Carbon steel pipes confirm ASTM-A-106 GRD. B Sch.40
C) Strainers are being supplied with fixed flanges & confirms to ASTM A-105 or IS-2062.OISM offers SS fittings as per individual customer’s requirement.
* All size products in single piece construction.
* All Dimensions are in millimeter.SKU: n/a -
PTFE
PTFE Lined DIP Pipe & Sparger
1) Dimensional Standards:
A) Flanges F-1 & F-2 can be supplied with standards like ASA, BS, DIN OR JIS as per individual customer’s requirement.
B) Lengths L-1, L-2, L-3 & nominal bore will be supplied as per individual customer’s requirement.2) Material of Construction:
A) PTFE white liner confirms to standard resin specification ASTM D-1457, ASTM D 4994 & 95 Type II.
B) Seamless Carbon Steel Pipe as per ASTM-A-106 Gr, B Sch 40.
C) Flanges confirms to ASTM A 105 Gr, B OR IS 2062SKU: n/a -
PTFE
PTFE Lined SS Wire Braided Hose Pipe & PTFE Lined Stub Ends
1) Dimensional Standards:
A) Flanges can be supplied with standards like ASA, BS, DIN OR JIS as per individual Customer’s requirement.
B) Lengths & Nominal bore will be supplied as per individual Customer’s requirement.2) Material of Construction:
A) PTFE White Liner confirms to standard resin Specification ASTM D-1457, ASTM D 4994 & 95 Type II.
B) Flanges confirms to ASTM A 105 Gr, B OR IS 2062. HoweverOISM Recommends SS Stub ends with both flanges as loose.
* All size products in single piece construction.
* All Dimensions are in millimeterSKU: n/a